Hdmi - Sony SRS-ZR5 Help Manual

6.
UPDATE indicator
Lights up or flashes depending on the status of the speaker's software update.
7.
NETWORK indicator
Lights up while in the network mode, or depending on the receiving service.
8.
BLUETOOTH indicator
Lights up or flashes while in the BLUETOOTH mode to indicate the status of the BLUETOOTH connection.
9.
HDMI indicator
Lights up while in the HDMI mode.
10
USB indicator
.
Lights up while in the USB mode.
11
AUDIO IN indicator
.
Lights up while in the AUDIO IN mode.
12
N-Mark
.
If your connecting device such as a smartphone is NFC-compatible, touch it on the N-Mark of the speaker. The speaker will
automatically turn on, register (pair) with the device, and make a BLUETOOTH connection.
13
USB port(
)
.
Connect to the USB flash drive. If you connect to the Walkman, etc., use the cable supplied with the device.
14
AUDIO IN port
.
Connect to the headphone jack of a portable audio device, etc., using a commercially-available audio cable (with stereo mini
plugs).
15
UPDATE/WPS button
.
After pressing and holding for 2 seconds while the indicator is lit, the software update starts after the beep sounds from the
speaker.
If your wireless router has a Wi-Fi Protected Setup™(WPS) button
After pressing and holding for two seconds, the speaker is ready to connect to a wireless router after the beep sound from
*4
the speaker .
16
SET UP button
.
Press to use the Wireless Surround function
devices.
17
STEREO PAIR button
.
Press to use the Wireless Stereo function
18
AC IN jack
.
Connect the supplied AC cable.
19
LAN port
*1
or Wireless Stereo function
*1
for combining two speakers.
*3
, you can use this button to connect to the network.
*1
for combining the speaker and other audio
30