Pairing And Connecting With A Bluetooth Device - Sony SRS-ZR5 Help Manual

Help Guide
Personal Audio System
SRS-ZR5

Pairing and connecting with a BLUETOOTH device

Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly.
It is necessary to pair a device with the speaker to be able to make a BLUETOOTH connection for the first time. Perform same
procedures to pair to other devices.
Do the following before starting.
Place the BLUETOOTH device within 1 m (3 ft) of the speaker.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
Turn down the volume of the BLUETOOTH device.
Stop playback on the BLUETOOTH device to avoid sudden loud sound output from the speaker.
Turn on the speaker.
1
The (power) indicator lights up in green.
Tap the FUNCTION button repeatedly until the BLUETOOTH indicator flashes.
2
The speaker enters the BLUETOOTH mode.
When you turn on the speaker for the first time after purchase, pairing information is not stored in the speaker. In this
case, by only placing the speaker in the BLUETOOTH mode, the BLUETOOTH indicator will begin to flash quickly and
the speaker will enter the pairing mode automatically. Then go to step
When you turn on the BLUETOOTH mode, the speaker will try to make a BLUETOOTH connection with the last
connected BLUETOOTH device. If the device is nearby, the BLUETOOTH connection establishes automatically and the
BLUETOOTH indicator stays lit. In this case, turn off the BLUETOOTH function on the BLUETOOTH device, or turn off
the BLUETOOTH device.
.
108