Table of Contents
Advertisement
7. Menu List
The menu is divided into the following four categories: Status, Input, Output and Scaling.
7-1. Status Menu (Display only)
Item
Input standard
Output standard
Reference
Input
SDI Audio
Code version
7-2. Input menu
Item
Source
SDI
Composite
Black level
-100 to +100mV
0.0mV
Video level
-6.0 to +6.0dB
0.0dB
Chroma level
-6.0 to +6.0dB
0.0dB
NTSC setup
Off
On
Displays the input video format.
Displays the output video format.
Displays the genlock signal format input to the UFM frame.(It is
displayed even when the genlock signal is not used in the
UFM-30UDC).
Displays the selected source of input video. (SDI or Composite)
Displays the embedded audio status of SDI output for each
channel.
Displays the firmware version of UFM-30UDC.
Setting
(Default in bold)
Selects input video source.
(The video format is auto-detected.)
Adjusts Black level in 0.8mV increments.
Adjusts Video level in 0.2dB increments.
Adjusts Chroma level in 0.2dB increments. 5-7
Selects NTSC setup between 0IRE (Off)
and 7.5IRE (On) when the NTSC
composite signal is input.
Display
Description
24
Refer to
5
5-7
5-7
3-2
Advertisement
Table of Contents
