Table of Contents
Advertisement
9.6
T
ROUBLESHOOTING
Downloaded from ManualsPrinter.com Manuals
3
Remove the jammed paper by gently pulling it straight out.
If there is any resistance and the paper does not move
when you pull, or if you cannot see the paper in this area,
check the fuser area around the toner cartridge. See
page 9.7.
4
Insert the paper tray into the machine until it snaps into
place.
5
Open and close the front door to resume printing.
In Optional Tray 2
1
Pull the optional Tray 2 open.
2
Remove the jammed paper from the machine.
If there is any resistance and the paper does not move
when you pull, or if you cannot see the paper in this area,
go to step 3.
3
Pull the standard Tray 1 open.
Advertisement
Table of Contents
