Hardware Overview - D-Link DCS-3410 User Manual

Section 1 - Product Overview
Power LED
The power LED is on the back of the camera.
As soon as the power adapter is connected to
the camera, the LED will turn green. Once a
connection has been established via Ethernet
port, the LINK LED will turn solid green. If traffic
is passing to the camera the LINK LED will blink.
If no Ethernet connection is detected the LINK
LED will not light up.
Link LED
Once a connection has been established via
Ethernet port, the LINK LED will turn solid green.
If traffic is passing to the camera the LINK LED
will blink. If no Ethernet connection is detected
the LINK LED will not light up.
D-Link DCS-3410 User Manual

Hardware Overview

I/O Connector
The DCS-3410 provides a terminal block with three
pairs of connectors situated on the back panel. Two
pairs are for input and the other is for output. The I/O
connectors provide the physical interface to send and
receive digital signals to and from a variety of external
devices.
DC Power Connector
The DC power input connector is
located on the DCS-3410 Network
Camera's back panel and is labeled
12V DC with a single socket to supply
power to the Network Camera.
7