ProForm EMOTION2 User Manual page 5

ASSEMBLy
Make Assembly Easier
This manual is designed to ensure that the
vibration platform can be assembled suc-
cessfully by almost anyone. Most people find
that if they set aside plenty of time, assembly
goes smoothly.
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
1. Orient the Lower Upright (B) so that the
lower control panel is facing the platform. While
a second person holds the Lower Upright near
the Base (A), insert the upright wire into the
indicated jack in the Base.
Next, insert the Lower Upright (B) into the Base
(A).
• For help identifying small parts, see the PART
IDENTIFICATION CHART on page 6.
• Tighten all parts as you assemble them.
• Assembly may require the following tools (not
included):
one adjustable wrench
one rubber mallet
one Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
B
Platform
A
4
Lower
Control
Panel
Upright
Wire
Jack