Table of Contents
Advertisement
APPENDIX C: MDM-832 SPECIFICATIONS
MDM-832 Specifications
FRONT PANEL
Audio Outputs
RMS loudspeaker
LEDs
AC Outputs
Circuit Breakers
REAR PANEL
Audio Inputs
RMS Network/Thru
AC Input
AC POWER
Safety Rated Voltage Range
Safety Rated Total Load,
Output 1–4
Safety Rated Total Load,
Output 5–8
Combined Total Load
PHYSICAL
Dimensions
Weight
Finish
ENVIRONMENTAL
Operating Temperature
Non Operating Temperature
Humidity
Operating Altitude
Non Operating Altitude
Shock
Vibration
Eight gold-plated XLR 3-pin or XLR 5-pin male connectors
Eight RMS FT-10 network connectors, connecting RMS-equipped
loudspeakers to the RMS network
Two LED indicators for AC voltage presence
Eight powerCON 20 connectors
Note: Connect only to Meyer Sound self-powered loudspeakers with auto-ranging input voltage
selection.
Two 15 A breaker switches for enabling AC outputs 1–4 and 5–8
Eight gold-plated XLR 3-pin female connectors
Link switches to route to outputs
Two RMS FT-10 network connectors with terminator, reporting
all connected amplifier operating parameters to the RMServer
One powerCON 32 connector
100–240 V AC, 50–60 Hz
12 A (UL/cUL); 15 A (IEC/EN)
Note: Must meet or exceed the sum of the maximum long-term continuous current draw of all
loudspeakers connected to AC Outputs 1–4.
12 A (UL/cUL); 15 A (IEC/EN)
Note: Must meet or exceed the sum of the maximum long-term continuous current draw of all
loudspeakers connected to AC Outputs 5–8.
24 A (UL/cUL); 30 A (IEC/EN)
Note: Indicates the maximum combined safety rated total load for AC Outputs 1–8.
2-space rackmount
19.00 inches W x 3.50 inches H x 8.50 inches D
(483 mm x 89 mm x 216 mm)
12 lbs (5.4 kg)
Low-gloss black, very fine textured
0° C to +45° C
–40° C to +75° C
To 95% at 35° C
To 5000 m (16,000 ft)
To 12000 m (39,000 ft)
30 g 11 msec half-sine on each of 6 sides
10 Hz – 55 Hz (0.010 m peak-to-peak excursion)
31
Advertisement
Table of Contents
