Table of Contents
Advertisement
CHAPTER 4: POWERING LOUDSPEAKERS WITH THE MDM-832
CABLE CONFIGURATIONS
Cabling from the MDM-832 to loudspeakers can be config-
ured with composite or separate cables, with loop outputs
or without.
Composite Cables
Composite cables carry AC power, balanced audio, and
RMS directly to loudspeakers through a single cable.
Legend
Composite Cable (Balanced Audio, RMS, Power)
MJF-210
MDM-832 Connected to Loudspeakers with Composite Cables
Composite Cables using Loop Outputs
Composite cables carry AC power, balanced audio, and
RMS through a single cable. Channels of the MDM-832 are
connected to loudspeakers, which in turn use loop outputs
to distributed AC power, balanced audio, and RMS to addi-
tional loudspeakers.
Legend
Composite Cable (Balanced Audio, RMS, Power)
MJF-210
MDM-832 Connected to Loudspeakers with Composite Cables and
Loop Outputs
16
Separate Cables
Separate cables carry AC power, balanced audio, and RMS
directly to loudspeakers.
Legend
Balanced Audio and RMS
Power
MJF-210
MDM-832 Connected to MJF-210 Loudspeakers with Separate Cables
NOTE:
MDM-832 modules equipped with XLR
3-pin outputs send balanced audio and RMS
through separate cables.
Separate Cables using Loop Outputs
Separate cables carry AC power, balanced audio, and RMS.
Channels of the MDM-832 are connected to loudspeakers,
which in turn use loop outputs to distributed AC power, bal-
anced audio, and RMS to additional loudspeakers.
Legend
Balanced Audio and RMS
Power
MJF-210
MDM-832 Connected to MJF-210 Loudspeakers with Separate Cables
and Loop Outputs
Advertisement
Table of Contents
