Appendix A: Composite Cable - Meyer Sound MDM-832 Operating Instructions Manual

APPENDIX A: COMPOSITE CABLE

COMPOSITE CABLE AND CONNECTORS
Composite cable and loudspeaker connectors are available from Meyer Sound. Composite cable can be terminated to carry
AC power, balanced audio, and RMS from the MDM-832 distribution module to AC-powered Meyer Sound loudspeakers.
NOTE: Bulk cable is comprised of three 14 AWG wires for AC power, one pair of 24 AWG wires for balanced
audio, and one pair of 24 AWG wires for RMS. Third-party cables (Gepco
Sommer Monolith, Whirlwind
Part Number Description
27.033.111.01 Breakout Cable UL AWN style 2464
500 ft roll (152.4 m)
464.026 ®
Neutrik
464.027 Neutrik XLR 5-pin male (NC5MX-B)
464.046 Neutrik XLR 3-pin male (NC3MX-B)
464.047 Neutrik XLR 3-pin female (NC3FX-B)
466.044 powerCON 20 input connector (NAC3FCA)
466.047 powerCON 20 loop output connector (NAC3FCB)
484.033 Weidmuller RMS connector
ASSEMBLING COMPOSITE CABLES
When connecting loudspeakers to the MDM-832 with composite cable, you must terminate each end of the cable with the
correct connectors to supply AC power, balanced audio, and RMS to the loudspeaker. XLR 5-pin connectors can be used
with composite cables to carry RMS and balanced audio through a single connector, provided the MDM-832 and connected
loudspeakers are configured with XLR 5-pin connectors. XLR 3-pin connectors can be used with composite cables to carry
RMS and balanced audio through separate connectors, provided the MDM-832 and connected loudspeakers are config-
ured with XLR 3-pin connectors.
Assembled Composite Cable with powerCON 20 and XLR 5-pin Connectors.
Assembled Composite Cable with powerCON 20, XLR 3-pin, and Weidmuller RMS Connectors.
™
APC series, Klotz composite, or equivalent) can also be used.
XLR 5-pin female (NC5FX-B)
® RunONE
AC conductors insulated separately with PVC. Intended for applica-
tions where bundled cables fan out to separate locations.
Connects to MDM-832 XLR 5-pin audio outputs or loudspeaker audio
loop outputs. Carries balanced audio and RMS.
Connects to loudspeaker XLR 5-pin audio inputs. Carries balanced
audio and RMS.
Connects to loudspeaker XLR 3-pin audio inputs. Carries balanced
audio.
Connects to MDM-832 XLR 3-pin audio outputs or loudspeaker audio
loop outputs. Carries balanced audio.
Connects to loudspeaker AC Inputs.
Connects to MDM-832 AC outputs or loudspeaker AC loop outputs.
Connects to MDM-832 and loudspeaker RMS inputs.
™ , Pro Co ™ Siamese Twins,
Use
25