Adjusting The Feet; Electrical Connection; Transporation Of The Dryer; Changing The Illumination Lamp - Beko DCSC 821 W Installation & Opersting Instructions

Condenser sensor dryer
Table of Contents

Advertisement

Installation
Connecting the water drain hose
1-2 Pull hose at the behind of the dryer by hand in order
to disconnect it from where it is connected. Do not
use any tools to remove the hose.
3
Connect one end of the drain hose supplied with
the dryer to the connection point from where you
removed the hose of the product in previous step.
4
Connect the other end of the drain hose directly to
the wastewater drain or to the washbasin.
1
3
A
Hose connection should be made in a
safe manner. Your drain house will be
flooded if the hose comes out of its
housing during water discharge.
C
Water drain hose should be attached to a
height of maximum 80 cm.
C
Make sure that the water drain hose
is not stepped on and it is not folded
between the drain and the machine.
Dryer / User Manual
2
4

3.4 Adjusting the feet

In order to ensure that the dryer operates more silently
and vibration-free, it must stand level and balanced on
its feet. Balance the machine by adjusting the feet.
Turn the feet to left or right until the dryer stands level
and firmly.
C
Never unscrew the adjustable feet from
their housings.

3.5 Electrical connection

For specific instructions for electrical connection
required during installation (see 1.1.1 Electrical
Safety)
3.6 Transportation of the dryer
Unplug the dryer before transporting it.
Drain all water that has remained in the dryer.
If direct water drain connection is made, then remove
the hose connections.
A
We recommend carrying the dryer in
upright position. If it is not possible
to carry the machine in the upright
position, we recommend carrying it
by tilting towards the right side when
looked from the front.

3.7 Changing the illumination lamp

In case an illumination lamp is used in your laundry
dryer
To change the Bulb/LED used for illumination of your
tumble dryer, call your Authorized Service.
The lamp(s) used in this appliance is not suitable for
household room illumination. The intended purpose of
this lamp is to assist the user to place laundry in the
tumble dryer in a comfortable way.
15 / 32 EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DCSC 821 W and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Dcur 801 wDcur 801 sDcu 8230

Table of Contents