Polaris FR-1516 Installation Instructions Manual page 7

Section 3 - Reverse camera installation
9. Tap into reverse positive wire
(red with yellow stripe.)
12. Lift carpet up to find grommet
15. Pull excess cable then apply
conduit to all exposed cable.
Notes:
Once you have repositioned the grommet after feeding the reverse camera cable through, we recommend applying
silastic around the outside the cable for waterproofing.
Once you have fed all camera cables - we recommend that you cable-tie any loose cabling.
10. Reinstall tail light.
13. Remove grommet and feed cable through.
16. Run reverse camera cable up into
glove box area.
7
continued
11. Remove kick panel and scuff plate on
passenger front side of vehicle
14. Use cutters to make an incision in
grommet so that you feed cable through it.
Once you have fed the cable through the
grommet, restore grommet back into its
original position.
Note
Feed reverse camera cable /
power cable to the area
behind the OEM multimedia
unit. Connect camera plug into
back camera connection and
attach power cable to back
wire on harness.