Related Manuals for Polaris Universal Luxx
Summary of Contents for Polaris Universal Luxx
- Page 1 Installation Manual Please read this manual before installing this product. Navigation & User manual: Available to download from: www.polarisgps.com.au...
-
Page 2: Warranty Details
SD card). • The installation of 3rd party apps that may cause harm to the unit. Warranty Terms The Universal Luxx is covered for 3 years and includes: • Defective Equipment • Defective Cables Not Covered under warranty: •... -
Page 3: Table Of Contents
Table of Contents Warranty Details What’s in the box? Wiring Diagram Installation notes Reverse Camera wiring diagram Second Camera Input 3 camera operation Mounting the unit Steering Wheel Controls 9-10 Installing 3rd party apps Returns Procedure Please note: once the unit is installed you can access your user manual on the head unit or you can download a copy from our website: www.polarisgps.com.au Record your serial number here and keep on hand for future records:... -
Page 4: What's In The Box
Yellow +12V to battery The Universal Luxx comes with a universal ISO connector. This means that you can purchase a secondary harness for certain model vehicles so that the unit becomes plug and play. We can try and source it for you or you can source it yourself. If you cannot find a secondary harness to fit, you can simply cut the ISO plug off and hardwire it into your vehicle. -
Page 5: Wiring Diagram
Wiring Diagram Universal Luxx Wiring diagram Please see installation notes on page 6. -
Page 6: Installation Notes
When pulling the dash apart, please use quality trim tools to avoid damaging your dash. Please do NOT cut any plugs off of any Polaris cameras. Doing so will void your warranty! If you need to blend other brand cameras into our system, please call Polaris on 1300 555 514 so we can refer you to a recommended dealer who has the skill and experience in performing this type of work. -
Page 7: Reverse Camera Wiring Diagram
Reverse Camera wiring Back of Universal Luxx Universal Luxx Loom Reversing wire (orange wire with black stripe) needs to be wired to Cam In Reverse Light positive to trigger the camera when the vehicle is in reverse. Red = 12 Volt positive Black = Ground 2 cam operation (e.g., car and caravan setup or front... -
Page 8: Camera Operation
Use the control box setup to plug an additional 2 cameras into the head unit when the front camera input Is already being used Figure 1 Figure 2 Universal Luxx loom Connect to CAM IN on the back of Universal Luxx Reverse in... -
Page 9: Steering Wheel Controls
Key 2 and steering wheel ground have been hardwired in properly according to your specific vehicle. Some CAN bus vehicles will work with a specific module, please call Polaris to see if we have a solution for your vehicle. Programming in your steering wheel controls Select Wheel Key study from the main menu Select and press one of your steering wheel controls. -
Page 10: Steering Wheel Controls
Steering Wheel Controls Once you have programmed all your steering wheel controls in, your screen should look similar to the one below: Short Long click click If you have made a mistake or you wish to change the functions you can press reset and start the process again. -
Page 11: Installing 3Rd Party Apps
Installing third party apps Polaris accept no responsibility for third party apps installed on the device. Please be aware that the more apps you install on the device, the slower the unit will perform. If you are having trouble with a third party app, we will do our best to try and help ... -
Page 12: Returns Procedure
Thank you for purchasing a Polaris product. If you have any enquires or queries, please call Polaris on 1300 555 514. Returns Procedure The warranty on this unit is 3 years from the date of purchase. If you are having problems with this unit, please follow these steps: Please contact us on 1300 555 514 or email technical@poron.com.au as there may...