Execute - Huawei espace 7810 Administrator's Manual

Huawei IP Phone eSpace
7810&7820&7830&7850&7870&7803X
Administrator Guide
Key Name
the SIP account
function
An example is as follows:

5.8.5 Execute

The page of the Execute type is used to request an IP phone to run commands in a specified
sequence. When the IP phone runs the command, no prompt message is displayed.
An example of the XML file of the Execute type is as follows:
<****Execute Beep = "yes/no">
<ExecuteItem URI = "URI"/>
</****Execute>
Table 5-15
Table 5-15 Parameters in the XML file of the Execute type
Parameter
****Execute
Beep
ExecuteItem
URI
Table 5-16
type.
Table 5-16 Common commands that are configured in the XML file of the Execute type
Name
Any Supported uri
Issue 01 (2011-12-31)
Key
on expansion
modules
lists the parameters in the XML file of the Execute type.
Mandatory Value Type
Yes The string ****
can be any value,
including a blank
character string.
No yes
no
Yes None.
No URI
lists the common commands that are configured in the XML file of the Execute
URI
http(s)://myserver.com/myscript.pl
Dial:XXXXX
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Function
LockIn is yes, the IP phone does not respond to this
key.
Description
Root element.
Indicates whether to play a beep tone
when the IP phone starts to run
commands.
Default value: no
Command item. A maximum of 30
commands can be added.
Operation corresponding to a
command, for example, calling a user
or downloading data from the server
based on the URI.
Function
Accesses the URI.
Calls the phone number.
5 Appendix
178