Account Configuration; Setting Basic Parameters - Huawei espace 7810 Administrator's Manual

Huawei IP Phone eSpace
7810&7820&7830&7850&7870&7803X
Administrator Guide
The following procedure configures a SIP account.
1.
2.
3.
4.
After the preceding operations are performed, the IP phone can make or answer calls. For
details about parameters, see Parameters for setting a SIP account,
area, and

2.2 Account Configuration

2.2.1 Setting Basic Parameters

Set basic parameters in the Basic area on the Account tab page, as shown in
Issue 01 (2011-12-31)
Click the Account tab. On the Account tab page, select Account 1 from the Account
drop-down list box, and set SIP parameters, as shown in Setting basic parameters .
Setting codec parameters shows the Codecs area for setting the voice coding types for
SIP accounts.
In the Basic area, select On for Account Active, and set User Name and Register
Name. Set the SIP server IP address and port number for SIP Server.
The Label and Display Name parameters are optional. Unless otherwise specified, retain the default
value for optional parameters.
If authentication information is configured on the SIP server, enter the authentication password in the
Password text box.
If the outbound proxy server is required, select Enabled from the Enable Outbound Proxy Server
drop-down list box, and enter the server IP address and port number provided by the carrier in the
Outbound Proxy Server and the corresponding Port text box.
Set voice coding types in the Codecs area.
Click Confirm.
Settings are saved, and the IP phone starts to register the account.
After the web page is refreshed, you can check the registration status of the account in
the Register Status area.
Parameters in the Advanced
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
area.
2 Single IP Phone Configuration
Parameters in the Codecs
Figure 2-3.
9