NordicTrack COMMERCIAL 14.0 User Manual page 23

HOW TO SET UP THE CONSOLE
Before using the elliptical for the first time, set up the
console.
1. Connect to your wireless network.
Note: In order to access the Internet, download iFit
workouts, and use some other features of the con-
sole, you must be connected to a wireless network.
See HOW TO USE THE WIRELESS NETWORK
MODE on page 33 to connect the console to
your wireless network.
2. Check for firmware updates.
First, see step 1 on page 31 and step 2 on page
32 and select the maintenance mode. Then,
see step 3 on page 32 and check for firmware
updates.
3. Calibrate the incline of the ramp.
See step 4 on page 32 and calibrate the incline
of the ramp.
4. Create an iFit account.
Touch the globe button at the bottom of the screen
and then touch the iFit button.
Note: For information about navigating in the
Internet browser, see page 34.
The browser will open to the iFit.com home page.
Follow the prompts on the website to sign up for
your iFit membership. If you have an activation
code, select the code activation option.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode, see page 24. To use
an onboard workout, see page 26. To use a
set-a-goal workout, see page 27. To create a
user-defined workout, see page 28. To use a
user-defined workout, see page 29. To use an iFit
workout, see page 30.
To use the equipment settings mode, see
page 31. To use the maintenance mode, see page
32. To use the wireless network mode, see
page 33. To use the sound system, see page
34. To use the Internet browser, see page 34.
Note: If there is a sheet of plastic on the screen,
remove the plastic.
23