Remote Control Functions - Pyle PSBVWF300 User Manual

REMOTE CONTROL FUNCTIONS

BUTTON CONTROL
Power: Press to power on, hold to turn off
Treble : Reduce treble
Treble+: Increase treble
Bass : Reduce bass
Bass+: Increase bass
Reset: Press for default settings
Play: Press to play music or listening
Phone, repeat for "Pause"
Pre: press choose last song
Hold to reduce Volume
Next: press to choose next song.
HDMI/CVBS: Press to choose the
Video output mode to HDMI or CVBS
HD/AUX/BT: Same functions of main unit
"INPUT" chooses between modes.
Vol /Vol+: Reduce/increase volume
INSTRUCTIONS
Pairing: press the "OK" button and the "2.4G/IR"
button at same time, the LED will flicker, then
plug USB dongle into the main unit's USB jack,
the LED light will stop flicking, then pairing is a
success.
KEY FUNCTIONS
Home: after entering the sub menu you can go
back to the original main menu directly.
Return: You can press the return key to put the
unit into last interface
CURSOR LOCK: Short press to lock the cursor
repeat return to the cursor state.
2.4G/IR: Switch to 2.4G or IR mode
Voice: Press in LED will light bright every 5 6
seconds, the voice is on. Repeat to close voice.
OPERATION
1.) After the remote controller has Paired to the
main unit, LED will light when button pressed,
un press turns off
2.) Air mouse sensitivity adjustment
a. Increase sensitivity: press "OK"& "VOL+" at
same time, LED light will Flicker for about 1 sec,
that means the sensitivity is increasing.
b. decrease sensitivity: press "OK"&"VOL " at
same time, LED light will flicker for about 1 sec,
that means sensitivity is decreasing.
7