Settings; Changing The Name Of The Frame; Setting The Alarm; Setting The Luminosity - Parrot DIA User Manual

Changing the name of the frame

You can change the name by which the frame will be known to other Bluetooth and Wi-Fi devices. To
do this:
1. Select Settings > Frame Name.
2. Enter the new name and select
Note: Spaces are replaced by underscores.

Setting the alarm

1. Select Settings > Alarm.
2. Enable the alarm by pressing the trackball.
3. Set the time then select the ring tone and volume
4. Select Repeat
> You can now press
Note:
- Do not select a day if you only want the alarm to ring once.
- To disable the alarm, select

Setting the luminosity

To change the luminosity of your frame:
1. Select Settings > Luminosity.
2. Use the trackball to increase or decrease the luminosity, then press it to confirm.
Parrot Dia – User guide
OK
to define which days the alarm is to be set.
to exit from the
Settings > Alarm > Disabled.
Alarm menu.

Settings

30