Setting Up The Connection Manually; Enabling/Disabling The Connection - Parrot DIA User Manual

4. Select your Wi-Fi network.
> If your network is secure, a virtual keyboard appears.
5. If you have a secure network, enter your WEP/WPA key.
WARNING:
- Network keys are case-dependent.
- If you have a WEP network, enter the WEP key without spaces.
- If your have a WPA or WPA2 network enter the key exactly as it appears, including
spaces if necessary.
> If the connection is established, a confirmation message appears.
> Select Details
Wi-Fi connection. Otherwise, select OK.
Note: You can find the IP address of the frame by selecting

Setting up the connection manually

1. Press the association or synchronisation button of your modem/router (refer to the
documentation that came with the device for more information).
2. Select Settings > Wi-Fi
> The connection window is displayed.
3. Select Configure, then
4. Enter the name of your network (SSID).
5. Select Infrastructure
6. If you have a secure network, select the encryption type then enter the network key.
7. Select OK.
Note: If you set up your connection manually, you can also set up a connection between the frame
and your PC without going via a Wi-Fi access point. To do this, select

Enabling/Disabling the connection

Once the connection has been set up, you can disable or re-enable it. To do this, select
Fi > Connection > Enable/Disable.
Parrot Dia – User guide
to find out the IP address of the frame or other information associated with the
on the frame.
Manual.
mode.
Settings > Information.
Ad-hoc mode.
Settings > Wi-
12