Setting Up A Wireless Connection; Setting Up A Connection With Ses/Wps; Setting Up A Connection Without Ses/Wps - Parrot DIA User Manual

Setting up a wireless connection

Setting up a connection with SES/WPS

If your modem/router supports SES or WPS technology:
1. Select Settings > Wi-Fi
> The connection window is displayed.
2. Select Configure.
> The list of available Wi-Fi networks is displayed.
3. Select Auto.
4. Press the SES or WPS button on your wireless modem or router (refer to the documentation
which came with your device for more information).
> If the connection is established, a confirmation message appears.
> Select Details
Wi-Fi connection. Otherwise, select OK.
Note: You can find the IP address of the frame by selecting

Setting up a connection without SES/WPS

If your modem/router does not support SES or WPS technology:
1. Press the association or synchronisation button of your modem/router (refer to the
documentation that came with the device for more information).
2. Select Settings > Wi-Fi
> The connection window is displayed.
3. Select Configure.
> The list of available Wi-Fi networks is displayed.
Note:
- If the name of your network does not appear in the list, select
connection manually.
- If only one network name appears, make sure you select it before going on to the next step.
Parrot Dia – User guide
on the frame.
to find out the IP address of the frame or other information associated with the
on the frame.
Settings > Information.
Refresh or set up the
11