Headlamp High/Low-Beam; Changer; Flash-To-Pass; Daytime Running - Chevrolet Cruze 2011 Owner's Manual

6-2 Lighting
(Headlamps): Turns the
headlamps on together with the
lamps listed below. A warning chime
sounds if the driver door is opened
when the ignition switch is off and
the headlamps are on.
Parking Lamps
Taillamps
License Plate Lamps
Instrument Panel Lights
Side Marker Lamps
(Front Fog Lamps): For
vehicles with fog lamps, press to
turn the lamps on or off.
See Front Fog Lamps on page 6 4.
When the lights are on,
lit. See Lamps On Reminder on
page 5 22.
Headlamp High/
Low-Beam Changer
Headlamp High/Low Beam
Changer: Push the turn signal/lane
change lever away from you to turn
the high beams on.
Pull the lever toward you to return to
low beams.
will be
This indicator light turns on in the
instrument panel cluster when the
high beam headlamps are on.

Flash-to-Pass

To flash the high beams, pull the
turn signal/lane change lever all the
way toward you. Then release it.

Daytime Running

Lamps (DRL)

Daytime Running Lamps (DRL) can
make it easier for others to see the
front of your vehicle during the day.
Fully functional daytime running
lamps are required on all vehicles
first sold in Canada.
This indicator light turns on in the
instrument panel cluster when the
DRL are on.
A light sensor on top of the
instrument panel makes the DRL
work, so be sure it is not covered.