Panaboard Operation Panel - Panasonic Panaboard UB-7320 Operating Instructions Manual

■ Panaboard Operation Panel

It is possible to perform the same operations as with the electronic board control panel (page 9) from the following
Panaboard Operation buttons.
Note
• While the Panaboard Operation Panel is displayed, the Copy Key on the electronic board control panel is
used for scanning images into the computer.
Panel Name
Contrast
Indicator
Contrast Button
Scan Button
Multi-Copy/
Error Indicator
Multi-Copy/Stop
Button
Advance Button
Reverse Button
Copy Button
This lamp indicator displays the contrast used during scanning or copying.
Indicator off: Normal scanning or copying contrast
Indicator on: Darker than normal scanning or copying contrast
Each time this button is pressed, the unit will alternate between normal
and dark contrast modes (Normal/Dark).
This button scans the screen.
This indicator displays the number of copies to be made. The display
changes each time the Multi-Copy/Stop Button is pressed.
Example: 1 → 2 → ··· → 9 →
(Selecting " " allows you to copy 4 screens continuously.)
When an error occurs, a flashing symbol will appear in this display to
indicate the error status. (See page 24.)
When making multiple copies or copying 4 screens continuously, press
this button until the desired number of copies or "
Multi-Copy/Error Indicator. This button can also be pressed to stop copying
while executing multiple copies or copying 4 screens continuously.
• The display changes as shown below each time the screen is copied.
After reaching 0, the display will reset to 1.
Example for multiple copies:
5 → 4 → 3 → 2 → 1 → 0 → 1 (Number is counted down.)
Example for copying 4 screens continuously:
→ → → → 0 → 1 (Display changes.)
* If scanning, the setting 1 to 9 for the number of copies or "
copying 4 screens continuously is ignored.
Clicking this button advances the screen from right to left.
Clicking this button twice advances two screens from right to left.
Clicking this button advances the screen from left to right.
Clicking this button twice advances two screens from left to right.
This button causes the screen to be copied.
Computer Interfacing
Description
→ 1 → ···
" is displayed on the
" for
19