Sanyo DC F200 Instruction Manual page 5

REMOTE CONTROL
Controls Inserting batteries
1
1.
2.
3.
4.
5.
6.
l—
2—
3—
4—
REMOTE CONTROLLER RB-D9
e
—6
—5
Power button (POWER)
Function button (FUNCTION)
Tuner controls
TUNER/BAND: Tuner function/Band select button
PRESET: Preset tuning up button
CD player controls
DISC SELECT: Disc select button
MEMORY: Memory button
(This button can also be used as a tuner memory button.)
REPEAT: Repeat button
HII : Play/Pause button
: Stop button
M+, W: Skip/Search buttons
RANDOM: Random play button
Volume buttons (VOLUME)
Number buttons (1 -9, O)
Number buttons (1 -9, O)
These buttons are used to select the track numbers on a disc or preset
radio stations.
If the function is "CD, the buttons select the track numbers on a disc.
If the function is "TUNER", the buttons select preset radio stations.
With any other function, the buttons will not function.
- Two buttons must always be pressed.
Example:
To select No. 3, press O, then 3.
To select No. 10, press 1, then O.
To select No, 25, press 2, then 5.
2
TwO AAISUM-31R6
batteries (not supplied)
Note:
Always remove batteries if the remote control is not to be used for a month
or more. Batteries left in the unit may leak and cause damage.
Remote control range
Remote sensor
The buttons on the remote control perform similar functions to similarly
marked buttons on the front panel.
4