Tape Dubbing; Maintenance - Sanyo DC F200 Instruction Manual

RECORDING
ii
Recording compact discs (Synchronous recording)
Recording from the tuner or video input
1.
Load a blank cassette into deck B.
1, Tune in the radio station to be recorded, or play a video cassette or
2.
3.
video disc.
2. Load a blank cassette into deck B.
3. Press the REC button to start recording.
4. Press the STOP/EJECT button to stop recording.
4.
5.
6.
Select "CD".
Load the disc(s) to be recorded.
For programmed recording, programme the material in advance
(as described under "PROGRAMMED PLAY").
Press the disc select button (DISC 1, DISC 2 or DISC 3) to select the
disc to be recorded first, then press the STOP button. Select the track
number to be recorded if required.
For programmed recording, this step is unnecessary.
Press the REC button on deck B. The PLAY button is engaged
simultaneously and CD recording starts.
Press the STOP/EJECT button on deck B to stop recording. Also the
CD player stops automatically.
When the end of the tape is reached, the CD player and deck B stotI
automatically.
When beat interference ie heard
A high-pitched noise called "bear is sometimes heard during the recording
of radio broadcasts.
In cases like this, set the DUBBING/BEAT CANCEL button to the position
that reduces the level of the beat noise.
TAPE DUBBING
(Deck A to Deck B)
1. Load the cassette to be played back into deck A and a blank cassette
into deck B.
2. Select 'TAPE.
3. Set the cassette in deck A to the point where recording will begin
4. Select the dubbing speed with the DUBBING/BEAT CANCEL button.
NOR:
For dubbing while monitoring at normal speed.
HIGH:
For dubbing tape at high speed (twice normal speed).
5. Press the PAUSE button on deck B.
6. Press the REC button on deck B.
7. Press the PLAY button on deck A to start dubbing.
8. To stop dubbing, press both STOP/EJECT buttons.
Automatic stop during dubbing
If deck B stops automatically, deck A continues playback mode at
normal speed.
If deck A stops automatically, deck B erases the tape to the end.
Do not change the dubbing speed during the dubbing operation.
MAINTENANCE
Cleaning the decks A and B heads
DECK B
DECK A
To ensure playback and recording with good-quality sound, use cotton
swab to clean the heads, pinch rollers and capstans of the decks after
about every 10 hours of use.
If the dirt persists, soak the swab in a little methylated spirit or head
cleaning fluid and then clean.
Main unit
& 'Q
Use a soft cloth to remove dirt on the main unit. 543
78
If the dirt persists, dip a soft cloth into a diluted solution of neutral
detergent, wring it out, wipe away the dirt, and then take up any moisture
1.
Cotton swab
with a dry cloth.
2,6.
Capstan
Do not use benzene, thinners or alcohol since they will mar the finish of the 3,8.
Pinch roller
surfaces.
4, 5, 7, Head
9