Rexel RSS2030 Instruction Manual page 5

Hide thumbs Also See for RSS2030:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Shredder Control Panel
Auto
Forward
Safety First
This means you should be careful because long hair can become
entangled in the cutting head.
This means don't reach into the feed opening of the cutting
head.
This means be careful of ties and other loose clothing which
could become entangled in the cutting head.
This means keep children away from shredder.
This means be careful of loose jewelry which could become
entangeld in the cutting head.
This means the door is open.
This means the bin is full.
This means no aerosols.
This means machine is cooling down.
Door Open Safety Function
If the door is opened during shredding as a safety precaution
the shredder will instantly stop, and the door open symbol/
indicator will glow red.
Mercury Anti-Jam Technology
Mercury Shredders will only shred stacks of paper that are
within the shredder's sheet capacity. For example, a shredder
with a capacity of 22 sheets will not allow the shredding of
more sheets than this.
Sensors in the paper feed area measure the thickness of
paper about to be shredded. The ability to shred or not is
communicated through red and green lighting. Green means
that the stack of paper is within the shredders sheet capacity
and OK to shred. Red means that you have too much paper,
remove some sheets in order to shred.
Given that you are unable to shred more sheets of paper
than the shredder is capable of shredding, paper jams are
prevented.
This prevents time wasted through reversing paper and
unblocking jams not to mention the mess it can create.
Reverse
RSM1130, RDM1150 and RDSM750 only.
Rare Occasions of Jamming
In the unlikely event of the shredder jamming, use the reverse
function to unblock the shredder (see Reverse function section).
Alternating between the reverse and continuous forward
functions will help unblock the feed area.
Over Heating
If small office models (RSS2030, RSX1630, RSM1130,
RSS2232 and RSX1632) are used continuously for long
periods of time the shredder may overheat. If this occurs the
thermometer symbol on the indicator panel will illuminate.
When the shredder is ready to be used again the thermometer
symbol will not illuminate.
This means do not shred credit cards.
This means do not shred paper clips.
This means do not shred staples.
This means do not shred CDs.
G
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents