Child Comfort Guide; Child Restraints (Latch) - GMC 2007 Canyon Owner's Manual

Getting to Know Your Canyon
6
Child Comfort Guide (Extended
Cabs and Crew Cabs only)
This feature provides added safety belt
comfort for smaller adults and for older
children who have outgrown booster
seats. When installed on a shoulder belt,
the comfort guide better positions the
belt away from the neck and head. One
comfort guide is provided for each rear
seat outboard position.
Install a comfort guide on a shoulder
belt
• Pull the elastic cord out from between
the seatback and the interior body to
remove the guide from its storage
clip.
• Slide the guide under and past the
safety belt (the elastic cord must be
under the belt).
• Place the guide over the belt and
insert the two edges of the belt into
the slots of the guide. (Be sure that
the belt is not twisted and that it lies
flat. The elastic cord must be under
the belt and the guide on top.)
• Buckle, position and release the
safety belt as described in Section
1 of your Owner Manual. Make sure
the belt crosses the passenger's
shoulder.
Storing the Child Comfort Guide
To remove and store the comfort guides,
squeeze the belt edges together so that
you can take them out of the guides.
Slide the guide back on its storage clip
located between the interior body and
the seatback. Storing the comfort guide
properly will prevent possible rattling.
See Section 1 of your Owner Manual.

Child Restraints (LATCH)

Your vehicle is equipped with LATCH
anchors, and may have top tethers for
use with a LATCH compatible child
restraint. If your child restraint is not
compatible with the LATCH system, you
may still use it by installing the child
restraint with the seat belt system.
Choose a child restraint that is appropri-
ate for the child's age and size (weight
and height).
See Section 1 of your Owner Manual.