Freestyle MN126-1 Service Manual page 54

8. Carefully align control/keypad to enclosure recessed control panel area, and
9. Route the flex circuit from control panel keypad notched area of control panel
10. Bend flex circuit 180
5-28
press keypad evenly to ensure all adhesive is in contact with plastic surface.
(Figure 5.42)
enclosure section. (Figure 5.43)
o
, being careful not to crease or fold the flex circuit.
(Figure 5.44)
If creased or folded, the flex circuit will be damaged
Figure 5.42
Figure 5.43
FreeStyle Service Manual MN126-1 E