Epson Stylus Scan 2000 User Manual page 18

6.
Press the ink cartridge clamp down until it locks into place. The
goes off after you close the clamp.
c
c
7.
Press the R
black ink cartridge installation position.
8.
In order to install the black ink cartridge, lift up the ink cartridge clamp on the left
and proceed as described in steps 4 to 6.
9.
When installation is complete, press the
The EPSON Stylus Scan moves the print head and begins charging the ink delivery
system.
While the ink is charging, the
a variety of mechanical sounds. These sounds are normal. When the ink delivery
c
system has been charged, the print head returns to its home (far right) position and
the P power light comes on.
10. Close the front cover.
18
Caution:
Once you install the ink cartridges, do not open their clamps again
until you replace the ink cartridges. Opening the clamps makes the
cartridges unusable.
cleaning button and release quickly. The print head moves left to the
Caution:
Install both ink cartridges. If either of the cartridges is not installed,
the EPSON Stylus Scan will not work.
P
Caution:
Never turn off the EPSON Stylus Scan while the
flashing.
R cleaning button and release quickly.
power light flashes and the Stylus Scan produces
Setting Up Your Stylus Scan 2000
A ink out light
P power light is