Advertisement
Quick Links
Western Products, PO Box 245038, Milwaukee, WI 53224-9538 • www.westernplows.com
July 15, 2013
Lit. No. 43577, Rev. 00
WB-100B
Walk-Behind Broadcast Spreader
85101
Owner's Manual and Installation Instructions
Original Instructions
CAUTION
Read this document before operating or
servicing the spreader.
This document is for WESTERN
WB-100B walk-behind broadcast spreaders with
®
serial numbers 0000 and higher.
This document supersedes all editions with an earlier date.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Western WB-100B
Summary of Contents for Western WB-100B
- Page 1 Western Products, PO Box 245038, Milwaukee, WI 53224-9538 • www.westernplows.com July 15, 2013 Lit. No. 43577, Rev. 00 WB-100B Walk-Behind Broadcast Spreader 85101 Owner's Manual and Installation Instructions Original Instructions CAUTION Read this document before operating or servicing the spreader.
- Page 2 Lit. No. 43577/43587/43597, Rev. 00 July 15, 2013...
-
Page 3: Table Of Contents
TABLE OF CONTENTS PREFACE .................................. 5 Owner's Information ............................5 SAFETY INFORMATION ............................6 LOADING .................................. 8 ASSEMBLY ................................9 Lit. No. 43577/43587/43597, Rev. 00 July 15, 2013... - Page 4 Lit. No. 43577/43587/43597, Rev. 00 July 15, 2013...
-
Page 5: Preface
PREFACE This manual has been prepared to acquaint you with When service is necessary, bring your walk-behind the safety information, operation and maintenance spreader to your distributor. They know your spreader of your new walk-behind spreader. Please read this best and are interested in your complete satisfaction. manual carefully and follow all recommendations. -
Page 6: Safety Information
SAFETY SAFETY DEFINITIONS LABELS Please become familiar with the labels on the WARNING spreader. Indicates a potentially hazardous situation that, if not avoided, could result in death or NOTE: If labels are missing or cannot be read, see serious personal injury. your sales outlet. - Page 7 SAFETY SAFETY PRECAUTIONS NOTE: Lubricate grease fi ttings after each use. Use a good quality multipurpose grease. Improper installation and operation could cause personal injury and/or equipment and property PERSONAL SAFETY damage. Read and understand labels and this Owner's Manual before installing, operating or making •...
-
Page 8: Loading
LOADING LOADING YOUR SPREADER WARNING Never remove spreader from vehicle with WARNING material in it as this could cause damage to the frame assembly. Do not overload spreader. Use chart below to calculate weight of material. Weights of material are an average for dry materials. CAUTION DO NOT leave unused material in Material Weights... -
Page 9: Assembly
ASSEMBLY ASSEMBLING YOUR SPREADER 4. Slide the handle assembly on the legs and fasten with two cap screws and locknuts. 1. Feed the control rod through the keyhole slot in Handle the lower bracket. Assembly 2. Move the control handle to the fully open position. 3. - Page 10 ASSEMBLY 5. Insert the control rod end into the gate linkage and 6. Spin the tires and make sure the spreader is secure with a hairpin cotter. running smoothly. Tighten all fasteners. 8. Place the screen inside the hopper and put the hopper cover on.
- Page 11 MAINTENANCE LUBRICATION To keep your spreader running smoothly, observe the following recommendations: Remove the gear housing and apply chain lube spray lubricant. Luricate both fittings with a good quality multipurpose grease. NOTE: Gears and axles must be lubricated and greased every 20 hours of use. Lit.
- Page 12 Western Products reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifi cations used. Western Products offers a limited warranty for all spreaders and accessories.
Need help?
Do you have a question about the WB-100B and is the answer not in the manual?
Questions and answers