Holding down the FUNC key and pressing the ON key provides access to the configuration pages. The
FUNC key sequences forward through the configuration pages. The START/STOP key reverses through
the pages, stopping at the Menu page. The CRSR key highlights selectable fields on each page. When a
field is highlighted, the 0 – 9 keys enter numeric data and the 8 or 9 keys move through list selections.
Press the CRSR key to accept changes. When a field is highlighted, pressing the FUNC key moves to the
next configuration page without saving the changes.
Changes made through the configuration pages are stored in EEPROM memory. To exit the configuration
pages, turn the power off. Then turn on again (without holding the FUNC key) for normal operation.
The configuration page sequence is as follows (menu categories are listed in parentheses):
•
'Jump To' Menu
•
Audio and Messages #1
•
Audio and Messages #2
•
Traffic Messages
•
Display Mode
•
Display Backlight
•
Key Backlight
•
Contrast
•
VFR Key Configuration
•
ARINC 429 Input #1 (First I/O Configuration page)
•
ARINC 429 Input #2 (Second I/O Configuration page)
•
ARINC 429 Output
•
RS-232 Input Output
•
Operation Configuration #1 (First Aircraft Configuration page)
•
Operation Configuration #2 (Second Aircraft Configuration page)
•
Temperature
•
Aircraft Address
•
Flight ID
•
Aircraft Type
•
Aircraft Size
•
ADS-B Configuration (ES Enabled Units Only)
•
EHS
•
Gray Code Input
•
External Switch State
•
Analog Input
•
RS-232 Input Display
•
ARINC 429 Input Display #1
•
ARINC 429 Input Display #2
5.2.1 Configuration Menu Page
CONFIGURATION MENU
The JUMP TO menu page provides the capability to select a
Configuration mode starting page without having to step
through all of the pages. Press the CRSR key and sequence
through to the desired selection with the 8 and 9 keys. Jump to
the selection by pressing the CRSR key again with the desired selection highlighted.
190-00207-02
Rev. U
CONFIGURATION MENU Page
GTX 330/330D Installation Manual
Page 5-5