Advertisement
DMX 512 Address Setting
Press the MENU button up to when
button and the display will blink. Use the DOWN and UP buttons to change the DMX 512
address. Once the address has been selected, press the ENTER button to setup or
automatically exit menu mode without any change after one minute. Back to the previous
functions without any change press the MENU button.
Channel Mode
Press the MENU button up to when
button and the display will blink. Use the DOWN and UP buttons to select the
channels mode) or
(5 channels mode) or
mode has been selected, press the ENTER button to setup or automatically exit menu mode
without any change after one minute. To go back to the functions without any change press
the MENU button.
Slave Mode
Press the MENU button up to when
button and the display will blink. Use the DOWN and UP buttons to select the
(Master)
(Slave 1) or
(Slave 2) mode. Once the mode has been selected,
press the ENTER button to setup or automatically return to the main functions without any
change after one minute. To go back to the functions without any change press the MENU
button again.
Show Mode
Press the MENU button up to when
button, Use DOWN and UP buttons to select the
or
(fade), if you select the color or fade mode, press the ENTER button to confirm,
and use the DOWN and UP buttons to select color 1-10 or fade speed (speed 1: slow, speed
2: middle, speed 3: fast). Once selected, press the ENTER button to setup or automatically
exit menu mode without any change after one minute. To go back to the last function without
any change press the MENU button.
is shown on the display. Pressing the ENTER
is shown on the display. Pressing the ENTER
(7 channels mode). Once the
is showing on the display. Pressing the ENTER
is shown on the display. Pressing the ENTER
(Random show) or
7-
Dimmer Mode
Press the MENU button up to when
button and the display will blink. Use the DOWN and UP buttons to select the
(Dimmer Mode 1: Optically Linear) or
(Dimmer mode 3: Inverse Square Law) or
the mode has been selected, press the ENTER button to setup or automatically return to the
main functions without any change after one minute. To go back to the functions without any
change press the MENU button again.
(4
Optically Linear: The increase in light intensity appears to be linear as DMX value is
increased.
Square Law: Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law: Light intensity control is coarser at low levels and finger at high levels.
S-cure: Light intensity control is finger at low levels and high levels and coarser at medium
levels.
Sound
Press the MENU button up to when
(color)
button, Use the DOWN and UP buttons to select the
off). Once selected, press the ENTER button to setup or automatically exit menu mode
without any change after one minute. To go back to the functions without any change press
the MENU button
is showing on the display. Pressing the ENTER
(Dimmer mode 2: Square Law) or
(Dimmer mode 4: S-cure) mode. Once
is shown on the display. Pressing the ENTER
(sound on) or
8-
(sound
Advertisement
