Centre Of Gravity; Rudder Deflections; Kit Contents - GRAUPNER EPIC Victory S Manual

Centre of gravity

The centre of gravity is located 70 mm aft of the leading edge of the fuselage opening
for the wing, which corresponds to the trailing edge of the CRP strut.

Rudder deflections

The elevator trim must be trimmed upward about 1 mm when the centre of gravity is properly adjusted.
It can be that a free linear mixer must be mixed from the gas channel to the elevator, so that the
elevator deflects upward 1 mm at full throttle.
This is necessary, because the intake channel of the model is located underneath, and the fuselage is
pulled downward when air is taken in.
These settings must be done separately for each model; they are only guidelines and depend on the
centre of gravity.
Aileron deflection, from 0-line
Rudder deflection from 0-line
Elevator deflection, from 0-line:

Kit contents

The kit includes the foam parts, injection-moulded parts, linkages, CRP strut
belts, trim weight, and wing bolts
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Not liable for printing errors. We reserve the right to make technical modifications.12/2011
+13 mm
-10 mm
+25 mm
- 25 mm
+ 15 mm
-10 mm
Page 9