Set/Play Schedule; Control Panel Lock; Adjustment Lock; Password - Chauvet LX GO User Manual

Set/Play Schedule

Control Panel Lock

Adjustment Lock

Password

Program Upload

Reset

LX Go™ User Manual Rev. 4
This setting allows you to set a date and time for the product to run automatically.
1. Go to EDIT > SCHEDULE level.
2. Select TASK (1~10).
a. Select DATE.
b. Enter Day (MONDAY~SUNDAY) or (EVERYDAY).
c. Enter START TIME (00:00).
d. Enter END TIME (00:00).
e. Select RUN.
f. Enter program to run (AUTO 01~10, CHASE 01~18, CUSTOM 1~5, or
DMXCAST).
3. Go to PLAY > SCHEDULE level to start. (PLAYING SCHEDULE) will display.
This setting enables you to activate or disable the control panel lock, which keeps non-
authorized personnel from changing the product's settings.
1. Go to SETTINGS > KEY level.
2. Select ON or OFF.
This setting allows you to lock the EDIT and/or SPEED settings.
1. Go to SETTINGS > ALLOW SPEED or SETTINGS > ALLOW EDIT level.
2. Select YES to activate or NO to disable.
a. When PASSWORD shows, enter the master access password as shown in
Password.
When the control panel lock is active, the product will prompt you to enter the
password after 30 seconds of control panel inactivity or after turning on the
product.
After being prompted to enter the password:
Press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
The Password is fixed by default and cannot be changed.
This option allows you to copy the custom programs of one LX Go™ onto other LX Go™
by using the Master/Slave mode.
1. Configure and connect the products in a Master/Slave arrangement, where the
master product has the custom programs you want to transfer to the slave products.
2. From the master product, go to the SETTINGS > UPLOAD level.
3. Select UPLOAD.
4. When PASSWORD shows, enter the master access password as shown in
Password.
5. Wait for the upload process to finish.
DO NOT upload the data from a LX Go™ to a different product. The other product
may become inoperative.
This setting gives you 3 options to reset the LX Go™ to the default values.
1. Go to the SETTINGS > RESET level.
2. Select RESET CUSTOM, RESET SCHEDULE, or RESET ALL.
3. When PASSWORD shows, Enter the master access password as described in
Password.
4. Wait for the reset process to finish.
Operation
-9-