Table of Contents
Advertisement
INSTALLATION NOTES
Since the AMC 25100MKII generates modest
amounts of heat, adequate ventilation is
reguired. Do not place the amplifier on a soft
surface such as a carpeted surface that may
block the ventilation holes of the bottom
cover. Also, avoid obstructing the ventilation
holes in the top cover.
CAUTION:
To prevent the risk of fire or
shock, do not allow any liquid or moisture to
enter into the internal parts of this product. If
any liquid accidentally enters this product,
shut off the power and remove the AC power
cord immediately. If the liquid is anything
other than clean water or pure alcohol, have
the product examined by a service
technician. Servicing of this product should
be referred to a qualified service technician.
Your AMC amplifier is set to work on your
local mains supply voltage. Check that your
local mains supply voltage agrees with the
voltage setting indicated on the back panel of
the amplifier. If not, please contact your
dealer or national distributor for details on
how to proceed further.
The cores of the mains lead are coloured in
accordance with the following code:
Blue
-Neutral
Brown
-Live
Note: Export units for certain markets have
moulded mains plugs fitted as standard.
As the colours in the mains lead may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be
connected to the terminal which is marked by
the letter N, or coloured black or blue. The
wire which is coloured brown must be
connected to the terminal which is marked by
the letter L, or coloured red or brown.
2
Advertisement
Table of Contents
