Installation - AMC MMA Series User Manual

Installation

CAUTION: Before beginning make sure the power cord is disconnected from mains source, set power switch
to "OFF" position and turn all level controls counterclockwise.
When using single mixer-amplifier application leave around 12 inch (about 30 cm) of air space around the
unit for efficient convection cooling.
When stacking units in an equipment rack allow 2U rack space between units for efficient convection cooling.
There should be also left 2-inches space between unit sides and rack side walls, and 4-inches from unit rear
panel and back of the rack.
How to attach rack mount bracket:
1. Each amplifier is supplied with two rack mount brackets and six screws for attaching to the unit.
2. Place a rack mount bracket flush to the side of the unit orienting rack mounting surface to front of the unit.
3. Fix it with screwing in given screws.
4. Repeat the same operations for attaching mount bracket to the other side of device.
5. Remove the four legs from bottom of unit.