Using Motionsd Studio - Panasonic SDR-SW20P Operating Instructions Manual

With a
computer
Importing motion pictures and still pictures
When this unit is connected to the computer, MotionSD STUDIO starts up
automatically.
● To use the application with Windows Vista, log on with administrator
authorization or via a standard user account. Guest accounts cannot be used.
To use the application with Windows XP or 2000, log on with administrator
authorization.
● Before using MotionSD STUDIO, please read [Readme First] by selecting
from the start menu. This file contains additional instructions or updated
information.
● The very first time that the software is started up, the End User License
Agreement is displayed. Read it carefully and click [I agree].
Connect the unit and AC adaptor (P.22) and set the mode dial to a position
other than [OFF].
Connect this unit and a computer with the USB cable (supplied).
Select [PC CONNECT] on the [SELECT USB FUNCTION] screen of the unit.
The [SD Browser auto start] dialog box appears.
● Do not use any other USB connection cables except the supplied one.
(Operation is not guaranteed with any other USB cables.)
● Do not disconnect the USB cable or shut off the power while the card
access lamp is lit.
● The first time the unit is connected to the computer, the computer may have to
be restarted.
● To output motion pictures edited with MotionSD STUDIO to SD cards, use an
applicable SD card. (P.20)
● When outputting a large number of scenes to an SD card, DVD-R/RW or
DVD-RAM, it may take time to display thumbnails or to output.
76
VQT1M21
5

Using MotionSD STUDIO

Insert the plugs as far as they will go.
Click [Yes].
The [SD Browser] window appears, therefore do
as instructed by displayed messages.