Installing Motionsd Studio - Panasonic SDR-S100 Operating Instructions Manual

Installing MotionSD STUDIO

≥ Before attempting to start up the CD launcher, close all other software applications
which are running.
≥ Do not perform any other operations on your PC while MotionSD STUDIO is being
installed.
1
2
3
4
≥ If you install the software in a PC that is not compatible with DirectX 9.0b or 9.0c, the PC
may stop operating properly. If you are unsure whether or not your PC is compatible,
contact the maker.
≥ If you are unsure whether or not your PC is compatible, contact the maker of your PC.
78
VQT0T60
Insert the CD-ROM into the PC.
The CD launcher starts.
(Refer to page 80 if the CD launcher fails to
start automatically after the CD-ROM has been
inserted into the PC.)
Click [MotionSD STUDIO 1.0E].
≥ The software application may not run properly
if you cancel the installation at any point e.g.
by pressing [Cancel].
Click [Next].
≥ Continue to follow the on-screen messages to
install it.
Click [Finish].
≥ After the application has been installed, the
PC will reboot automatically.
≥ Depending on the operating environment, you
may be required to install DirectX 9.0b. If so,
click [Yes], and install it.