Automatic Recording (Motion Pictures) - Panasonic SDR-SW20P Operating Instructions Manual

Recording
To change aspect ratio to 4:3
[ASPECT]→[4:3]
Default aspect ratio at the time of
purchase is set to 16:9 (widescreen).
To remove sound when record
button is pressed
[BEEP SOUND]→[OFF]
To remove on-screen display
[DISPLAY]→[OFF]
● When the unit is running on battery power, power is automatically shut OFF
to conserve battery life if no operations are performed for about 5 minutes. To
reuse the unit, set the mode dial to [OFF] and then reselect a mode.
To prevent power from shutting OFF automatically: (P.84 [POWER SAVE])
● The interval between starting and stopping recording is recorded as one single
scene. The counter is reset to "0h00m00s" after each scene.
● At the time when the unit is purchased, the audio recording mode is set to
[DOLBY]. For playback in a device which does not support Dolby Digital, set
[AUDIO REC] to [MPEG]. (P.84)
34
VQT1M21
2
Automatic recording
(motion pictures)
→[ADVANCED]→
→[SETUP]→
→[SETUP]→
Set to [ ].
1
2
Press
Start recording.
3
Recording
mode
Time remaining (flashes
red when under 1 minute)
Recording continues even if the
LCD monitor is closed.
Stop recording.
4
The unit is still recording if [ ] is
red. Do not move the unit.
.
Time elapsed
Recording in
progress (red)
Paused (green)