Installing Motionsd Studio - Panasonic SDR-S150 Operating Instructions Manual

Installing MotionSD STUDIO

≥ Before attempting to start up the CD launcher, close all other software applications which
are running.
≥ Do not perform any other operations on your PC while MotionSD STUDIO is being
installed.
1
2
3
4
5
≥ If you install the software in a PC that is not compatible with DirectX 9.0b or 9.0c, the PC
may stop operating properly.
≥ If you are unsure whether or not your PC is compatible, contact the maker of your PC.
80
VQT0X39
Insert the CD-ROM into the PC.
The CD launcher starts.
(Refer to page 82 if the CD launcher fails to start
automatically after the CD-ROM has been
inserted into the PC.)
Click [MotionSD STUDIO 1.1E].
≥ The software application may not run properly
if you cancel the installation at any point e.g.
by pressing [Cancel].
Click [Next].
≥ Continue to follow the on-screen messages to
install it.
Select the video system.
Click [Finish].
≥ Depending on the operating environment, you
may be required to install DirectX 9.0b. If so,
click [Yes], and install it.
≥ If it is necessary to reboot the PC after the
application has been installed, click [Yes]
and reboot it.