Using This Unit As An External Drive (Mass Storage) - Panasonic SDR-SW20P Operating Instructions Manual

With a
computer
Connecting the unit to a computer
Use the AC adaptor to supply power to this unit and connected devices.
Connect the unit and AC adaptor (P.22) and set the mode dial to a position
other than [OFF].
Connect this unit and a computer with the USB cable (supplied). (P.76)
Select [PC CONNECT].
● When this unit is connected to the computer, [Removable Disk] appears in [My
Computer].
● The SD card appears as an external drive (E drive, etc.) in Windows Explorer.
● While the computer is accessing the SD card of this unit, [
bottom right of the unit's LCD monitor.
Disconnecting the unit
Click the [
Click "Safely remove USB Mass Storage Device."
When the disconnection confirmation message appears, click [OK].
Disconnect the USB cable (supplied) from the computer.
78
VQT1M21
6
Using this unit as an
external drive
• The SD card in the unit appears on the
computer as an external drive.
] or [ ] icon on the task bar.
(Mass storage)
] appears at the