How To Insert An Sd Card/ Microsd Card - Kenwood DNX893S Quick Start Manual

Basics
7 Volume knob
• Turning adjusts volume up or down.
• Displays the popup menu screen.
• Pressing for 1 second switches view camera display
on/off.
8 microSD card slot
• A slot to insert a microSD card.
See How to insert an SD Card/ microSD Card
(P.7).
• You can play audio/visual file in the card. * (Only for
DNX693S, DNX573S)
• A microSD card slot for upgrading the map. For how
to upgrade the map, refer to the instruction manual of
the navigation system.
* If the map update file remains in the microSD card, you
cannot play audio/visual file.
How to insert an SD Card/ microSD
Card
DNX8 DNX7
1
Press <G> button.
2
Touch [OPEN] to the panel fully opens.
3
Hold the SD card with the label facing up, and
insert it into the slot until it clicks.
Labelled side
4
Press <G> button.
Ñ Eject an SD Card
1
Press <G> button.
2
Touch [OPEN] to the panel fully opens.
3
Push the SD card until it clicks and then remove
your finger from the card. The card pops up so
that you can pull it out with your fingers.
4
Press <G> button.
DNX6 DNX5
1
Hold the microSD card with the label side
facing right and the notched section down, and
insert it into the slot until it clicks.
✎
NOTE
• A dummy microSD card is inserted as the slot cover.
Remove it before using and keep it in an appropriate place.
Ñ Eject a microSD Card
1
Push the microSD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with your
fingers.
English | 7