Basics; Functions Of The Buttons On The Front Panel; How To Insert An Sd Card - Kenwood DNX8160S Quick Start Manual

Basics

Basics
Functions of the Buttons on the
Front Panel
1 2 3 4
9
10
1 s
• This indicator flashes when the vehicle ignition is off
(Instruction Manual P.70).
2 R , S (Volume)
• Adjusts volume. The volume will go up until 15 when
you keep pressing [ R ].
3 NAV
• Displays the navigation screen.
6
4 MENU
• Displays the popup menu screen.
• Pressing for 1 second switches view camera display
on/off. (DNX8160S/ DNX8160SM only)
• Pressing for 1 second turns the screen off.
(DNX8160DABS only)
5 HOME
• Displays the HOME screen (Instruction Manual P.14).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
6
• Displays the APP (CarPlay/ Android Auto/ Mirroring)
screen.
• Pressing for 1 second displays the Voice Recognition
screen. (Instruction Manual P.61)
7 G
5 6 7
• Displays the Angle Adjust screen.
– [DISC EJECT]: Ejects the disc.
– [OPEN]: Fully opens the panel to the location of the
SD card slot.
• When the panel is opened, pressing closes the panel.
• To forcibly eject the disc, press it for 2 seconds and
touch [DISC EJECT] after the message is displayed.
8 Disc insert slot
• A slot to insert a disc media.
9 SD card slot
• A slot to insert an SD card.
See How to insert an SD Card (P.6).
• An SD card slot for upgrading the map. For how to
upgrade the map, refer to the instruction manual of
the navigation system.

How to insert an SD Card

1
Press <G> button.
2
Touch [OPEN] to the panel fully opens.
3
Hold the SD card with the label facing up, and
insert it into the slot until it clicks.
Labelled side
4
Press <G> button.
Ñ Eject an SD Card
1
Press <G> button.
2
Touch [OPEN] to the panel fully opens.
3
Push the SD card until it clicks and then remove
your finger from the card. The card pops up so
that you can pull it out with your fingers.
4
Press <G> button.