Kenwood DNX893S Quick Start Manual page 28

Installation
Ñ Connecting a USB device
DNX893S/ DNX7160BTS/
DNX693S/ DNX5160BTS
USB terminal
[1]
USB device [2]
iPod/iPhone terminal [1]
USB device
[2]
iPod/iPhone / USB terminal (1 m)
[1]
iPod/iPhone / USB maximum power supply current :
[1]
DC 5 V = 1.5 A
[2] Sold separately / Use CA-U1EX to extend the cable if
necessary. (Max 500 mA, 5V)
Ñ Connecting the Wireless Display Adapter to
use smartphone/iPod/iPhone over a wireless
connection
Wireless Display Adapter: KCA-WL100
(Sold separately)
28
Ñ Connecting an iPod/iPhone
⿠Lightning connector
(1 m)
KCA-iP103 (0.8m)
DNX773S/
DNX573S
(1 m)
Lightning Digital AV
Accessory 2
Adapter
KCA-iP103 (0.8m)
iPod/iPhone maximum power supply current :
[1]
DC 5 V = 1.5 A
[2] Sold separately
[3] Optional accessory
iPod/iPhone [2]
[3]
[2]
KCA-HD100
(1.8 m) [3]
Accessory 2
iPod/iPhone terminal (1 m)
[1]
[3]
iPhone (with CarPlay)
[2]
⿠30-pin connector
KCA-iP102 (0.8m) [3]
iPod/iPhone terminal
✎
NOTE
• When you connect iPod/iPhone with HDMI cable, the
necessary cable differs depended on the type of the
connecter like Lightning or 30-pin. Refer to "Connecting
iPod/iPhone" (P.13) for the necessary cable.
• The setting is necessary to meet the connected iPod/
iPhone or Android device. Refer to "Selecting the
Android/ iPod/ iPhone device to play and connection
method" (P.13).
iPod
[2]
Accessory 2
[1] (1 m)