Speco D8HT User Manual page 30

Item
DESCRIPTION
LANGUAGE
DATE DISPLAY
FORMAT
DATE&TIME
SETUP
CLIENT ACCESS
NTP
Table 4.2.1. Menu Items in SYSTEM Setup Screen
Press the button to view the system information. (Software Version, Storage Size, IP
Address, MAC Address and DDNS Status)
Select the display language using the mouse or the remote control. Once a
language is selected, the display language will change.
Select the date display format using the mouse or the remote control. Options are:
MM/DD/YYYY, YYYY/MM/DD, DD/MM/YYYY, YYYY-MM-DD, MM-DD-YYYY, DD-MM-YYYY
Select the display date and time using the mouse or the remote control and press
OK button to set the present date and time.
Select DAYLIGHT SAVING using the mouse or the remote control and select the
appropriate daylight saving time zone. The available options are:
OFF: Daylight saving is turned off.
USA: Applies the USA daylight saving time.
EU: Applies the EU daylight saving time.
- Select the GMT AREA using the mouse or the remote control.
- Set the time difference with the standard time using the mouse or the
button.
OTHERS: If the time zone is neither USA nor EU, set the date and time of the
daylight saving period.
- Select BEGIN or END using the remote and press the SEL button.
Caution
- Do not set the start time to 23:00 for DLS.
- DLS cannot be applied if the date of BEGIN and END is the same.
Enable/Disable remote access through the network.
NTP (Network Time Protocol) which synchronizes the time of the computer systems
Description
30