Table of Contents
Advertisement
REMOTE ACCESS
SETTING UP GROUPS
To add a group, Select settings
To add a group, select the Video Source/group Tab
•
Select add group.
•
Type the name of the group in the current group box.
•
Select Modify to save the new group.
o Enter the username and password
o Enter an Alias name for the group.
o Enter the Device ID of your Smartbridge DVR system for the group
o Select receive remote alarm signals if you want
to receive an alarm alert for your Smartbridge DVR
o Select Enable Pop Up to enable pop ups
•
Select add source to add a camera source
•
Select DEL Source to delete a camera source
•
Select Default to revert back to default settings
•
Select Apply to all to apply all settings to all
camera sources within the group
•
Select Save to save all settings.
Select the Local User Tab to add user rights/permissions to the
Smartbridge Software. You are able to add users to the Smartbridge
Remote viewer software. Administrator has full access to the
all features. General user has viewing capability only.
Remote Configuration
With the Smartbridge software, you are able to configure camera settings remotely. To do this, right
click on any camera source that has a camera connected and select set remotely. (Note, for this
feature to be enabled, you must select the enable devices management box in settings – Advanced.
Hide quick links:
Advertisement
Table of Contents
