Language - First Alert DVRA0405 User Manual

To Add a LOCAL or NeTWORK USeR
To add or edit a new Local or Network User, from the Setup Menu, choose
SYSTEM and then USER. Click ok to access this menu.
1. Choose Local or Network User Group.
2. Click ADD to create a new user.
3. Input new user name and password (required). The password is set by
the ADMIN who is creating the new user.
4. Select user permissions by placing a check next to the action you are
allowing access. Note: Granting SYSTEM access will allow the new user
to change the settings of the DVR, including the settings of the ADMIN.
5. Click OK to confirm and Click OK on the User menu screen to exit.
To eDIT a Local or Network User
1. Choose Local or Network User Group.
2. Highlight the user you wish to edit.
3. Click EDIT to change user permissions.
4. Select/deselect user permissions by placing a check next to the
action you are allowing access.
5. Click OK to confirm and Click OK on the User menu screen to exit.
To Delete a Local or Network User
Only those users with SYSTEM access can create or edit a user
permission.
1. Choose Local or Network User Group.
2. Highlight the User to be deleted.
3. Click Delete. The system will ask you to confirm this action.
Record: Allows the USER to set the DVR to record (or not record) on one
or all channels.
Network: Allows the USER to access the DVR via a remote networked
connection.
PTZ: Allows the User to change PTZ parameter settings.
Quit: Allows the User to power off or Restart the DVR.
Playback: Allows the USER to playback recorded video on the DVR.
System: Gives the USER ADMIN rights to change the setup of
the DVR.
Video: User is allowed to change the video settings on the monitor screen
from the drop down menu
Other: No function.
Modifying Passwords
An ADMIN – person with permission to system setup, has the ability to
change their password as well as all others.
A USER without permission to system setup access, must contact another
user or administrator who has system setup access in order to change
their password.

Language

The language is configurable. To set the language, from the SETUP menu
select SYSTEM. Then select LANGUAGE. The following screen appears.
To change the system language: from the LANGUAGE drop down menu
select the language amongst 8 different languages.
Click OK to apply. Click EXIT to close the menu.
Note: The system will change the language after a restart. A pop up box
will ask if you want to perform a restart immediately or not. The default is
English.
INITIAL SETUP
SYSTEM OPERATION
NETWORK USER Permission Screen
Use the virtual mouse to configure the
Page 15
Permissions Screen
LOCAL USER Permission Screen
options as desired.