Using the radio microphone
Using the radio microphone
CAUTION
Reduced transmission power!
If you touch the antenna
the transmission power will be considerably reduced!
Only hold the radio microphone by its body.
To establish a transmission link, proceed as follows:
1. Switch the radio microphone on (see next section).
2. Switch the receiver on (see the receiver's instruction
manual).
The transmission link is established and the display
backlighting of the receiver changes from red to
orange.
It is vital to observe the notes on frequency
selection on page 29.
If you cannot establish a transmission link between
transmitter
"Synchronizing the radio microphone with a receiver"
on page 29.
Switching the radio microphone on/off
12 |
SKM 300 G3
8
and
receiver,
0
C
of the radio microphone,
8
read
the
chapter
3