VTech ErisTerminal VSP736 User Manual page 69

Configuring the Phone
Setting the date and time (continued)
To set the Time Zone:
1. From the Date & Time menu, press q to highlight Time Zone.
2. Press
Edit
3. Press p or q to select your time zone.
4. Press
Save
To enable or disable the NTP (Network Time Protocol) server:
1. From the Date & Time menu, press q to highlight NTP server.
2. Press t or u to select Enabled or Disabled.
3. Press
Save
Note: If the NTP server is disabled, you must manually set the time and date.
This setting is valid only if the system administrator has already configured
the Network Time settings. For more information, see the VSP736 Deskset
Administrator and Provisioning Guide.
To configure the NTP Server:
1. From the Date & Time menu, press q to highlight NTP and then press
.
Edit
2. On the NTP menu, enter the URL of the NTP server. Press the
switch between entering upper case letters, lower case letters, and numbers.
3. Press
Save
To manually set the Year, Month, Day, Hour and Minute:
1. From the Date & Time menu, press q to highlight Set manually.
2. Press SELECT.
Note: If the NTP server is enabled, you cannot modify this setting. See "To
enable or disable the NTP (Network Time Protocol) server:".
3. For each setting, press t or u to select the desired setting, and then press
q to move to the next line.
4. When you have finished, press
.
.
.
.
.
Save
69
key to
ABC