Unpacking And Assembly - Duracell DG65M-R62 Series Owner's Manual

Unpacking and Assembly

WARNING: LIFTING HAZARD
The portable generator is heavy. Ensure that proper lifting equipment is available to
unload and move this portable generator. The generator can crush and cause serious
injury if it rolls out of control or tips over. Two or more adults are required for
assembly.
Upon receipt, inspect generator for missing or damaged parts. Verify that it is the generator you ordered.
See "Component Identification" section of this manual for a diagram of the generator and its components.
•
For missing components, contact Duracell Support at 1-888-980-4938.
•
For damaged components, contact the freight company that delivered the unit and file a claim.
•
If complete, fill out the product serial number information. See Limited Warranty section of this
manual.
•
IMPORTANT NOTE:
unpack and assemble the unit.
•
Additional tools to aid assembly: Rubber Mallet, #3 or #2 Phillips head screwdriver, wrenches (2-
10 mm or 2-3/8 inch, 1 – 22mm or 7/8 inch, 1-19mm or ¾ inch, 1-18mm or 11/16).
UNPACK:
a) Carefully cut the straps and tape on the top
of the box and open.
b) Remove the cardboard cover and place it on
the floor, this will be used as an assembly
base for the next steps.
c) Remove the box containing the Mobility &
Assembly kit and set it aside.
DG65M-R62
This generator is heavy and at least 2 (two) adults will be required to
12 | P a g e