http://arttel.ru
22.10 Configuring Busy Lamp Field
Activate
[voip/services/busy_lamp_field/enabled]
BLF Subscription Period
[voip/services/busy_lamp_field/subscripti
on_period]
User Resource List
[voip/services/busy_lamp_field/uri]
Administrator's Manual
Busy Lamp Field (BLF) can be configured using the Web or Configuration File, as
described below.
Note:
BLF is only applicable to the 320HD IP Phone.
¾
To configure BLF:
„
Using the Web:
1.
Access the 'Services' page (Configuration tab > Voice Over IP menu >
Services).
Figure 22-8: BLF Support Web Fields
2.
Configure the BLF parameters according to the table below, and then click
Submit.
„
Using the Configuration file:
Table 22-9: BLF Parameters
Parameter
310HD, 320HD and 420HD IP Phones
Description
Enables the BLF feature:
ƒ
[0] Disable
[1] Enable (default)
ƒ
The interval between BLF and SIP SUBSCRIBE
messages.
The valid range is 0 to 86400. The default value is
3600.
The user resource list. This must be the username
(not the domain name). For example, if the URI
resource list is mylist@server.com, then only the
value mylist must be entered.
The valid value is up to 64 characters.
Note: This parameter is applicable only if the
parameter
voip/services/application_server_type is set to
BSFT.
146
Document #: LTRT-09910