Wind Noise Reduction Function; Microphone Level - Panasonic HDC-SX5P Operating Instructions Manual

Wind noise reduction function

This is for reducing the wind noise
coming into the microphone when
recording.
ＨＤ ＨＤ ＨＤ ＨＤ
ＨＤ ＨＤ ＨＤ ＨＤ
ＲＡＭ -ＲＷ
ＲＡＭ
-ＲＷ （Ｖ Ｒ ） -ＲＷ （Ｖ）
¬ Rotate the mode dial to select
.
Press the MENU button, then select
[VIDEO] (HD mode) or [ADVANCED]
#
(STD mode) [WIND CUT]
and press the cursor button.
To cancel the wind noise reduction
function
Press the MENU button, then select [VIDEO]
(HD mode) or [ADVANCED] (STD mode) #
[WIND CUT] # [OFF] and press the cursor
button.
≥ This function's default setting is [ON].
≥ The wind noise reduction depends on the wind
strength. (The stereo effect may be reduced if
this function is activated in strong winds.
However, the stereo effect is automatically
restored when then the wind weakens.)
ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ
VIDEO
-Ｒ -Ｒ Ｄ Ｌ
-Ｒ -Ｒ Ｄ Ｌ
or
#
[ON]
MENU

Microphone level

This is for adjusting the microphone
input level.
ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ
ＲＡＭ -ＲＷ
When recording, the input level from the built-in
microphones and the external microphone
terminal can be adjusted.
¬ Rotate the mode dial to select
.
1
Press the MENU button, then
select [VIDEO] > [MIC LEVEL]
> [SETrAGC] or [SET] and
press the cursor button.
AGC: Auto Gain Control
[AUTO]: AGC is activated, and the
recording level is adjusted
automatically.
[SETrAGC]: The desired recording level can
be set. AGC will also be
activated to reduce the amount
of sound distortion.
[SET]: AGC is not activated and so
natural recording can be
performed.
2
Move the cursor button left or
right to adjust the microphone
input level.
A Left
B Right
C Microphone input level
Recording
ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ
VIDEO
-Ｒ -Ｒ Ｄ Ｌ
or
MENU
71
VQT1J42